Electron Transfer Dissociation Research Articles

Expanding Differential Ion Mobility Separations into the MegaDalton Range.

Along with mass spectrometry (MS), ion mobility separations (IMS) are advancing to ever larger biomolecules. The emergence of electrospray ionization (ESI) and native MS enabled the IMS/MS analyses of proteins up to ∼100 kDa in the 1990s and whole protein complexes and viruses up to ∼10 MDa since the 2000s. Differential IMS (FAIMS) is substantially orthogonal to linear IMS based on absolute mobility K and offers exceptional resolution, unique selectivity, and steady filtering readily compatible with slower analytical methods such as electron capture or transfer dissociation (ECD/ETD). However, the associated MS stages had limited FAIMS to ions with m/z < 8000 and masses under ∼300 kDa. Here, we integrate high-definition FAIMS with the Q-Exactive Orbitrap UHMR mass spectrometer that can handle m/z up to 80,000 and MDa-size ions in the native ESI regime. In the initial evaluation, the oligomers of monoclonal antibody adalimumab (148 kDa) are size-selected up to at least the nonamers (1.34 MDa) with m/z values up to ∼17,000. This demonstrates the survival and efficient separation of noncovalent MDa assemblies in the FAIMS process, opening the door to novel analyses of the heaviest macromolecules.

MiRNA and DNA analysis by negative ion electron transfer dissociation and infrared multiple-photon dissociation mass spectrometry

BackgroundThe use of simple and hybrid fragmentation techniques for the identification of molecules in tandem mass spectrometry provides different and complementary information on the structure of molecules. Nevertheless, these techniques have not been as widely explored for oligonucleotides as for peptides or proteins. The analysis of microRNAs (miRNAs) warrants special attention, given their regulatory role and their relationship with several diseases. The application of different fragmentation techniques will be very interesting for their identification. ResultsFour synthetic miRNAs and a DNA sequence were fragmented in an ESI-FT-ICR mass spectrometer using both simple and hybrid fragmentation techniques: CID, nETD followed by CID, IRMPD, and, for the first time, nETD in combination with IRMPD. The main fragmentation channel was base loss. The use of nETD-IRMPD resulted in d/z, a/w, and c/y ions at higher intensities. Moreover, nETD-IRMPD provided high sequence coverage and low internal fragmentation. Native MS analysis revealed that only miR159 and the DNA sequence formed stable dimers under physiological ionic strength. The use of organic co-solvents or additives resulted in a lower sequence coverage due to lesser overall ionization efficiency. NoveltyThis work demonstrates that the combination of nETD and IRMPD for miRNA fragmentation constitutes a suitable alternative to common fragmentation methods. This strategy resulted in efficient fragmentation of [miRNA]5- using low irradiation times and fewer internal fragments while ensuring a high sequence coverage. Moreover, given that such low charge states predominate upon spraying in physiological-like conditions, native MS can be applied for obtaining structural information at the same time.

Phosphorothioate RNA Analysis by NETD Tandem Mass Spectrometry

Therapeutic RNAs are routinely modified during their synthesis to ensure proper drug uptake, stability, and efficacy. Phosphorothioate (PS) RNA, molecules in which one or more backbone phosphates are modified with a sulfur atom in place of standard nonbridging oxygen, is one of the most common modifications because of ease of synthesis and pharmacokinetic benefits. Quality assessment of RNA synthesis, including modification incorporation, is essential for drug selectivity and performance, and the synthetic nature of the PS linkage incorporation often reveals impurities. Here, we present a comprehensive analysis of PS RNA via tandem mass spectrometry (MS). We show that activated ion-negative electron transfer dissociation MS/MS is especially useful in diagnosing PS incorporation, producing diagnostic a- and z-type ions at PS linkage sites, beyond the standard d- and w-type ions. Analysis using resonant and beam-type collision-based activation reveals that, overall, more intense sequence ions and base-loss ions result when a PS modification is present. Furthermore, we report increased detection of b- and x-type product ions at sites of PS incorporation, in addition to the standard c- and y-type ions. This work reveals that the gas-phase chemical stability afforded by sulfur alters RNA dissociation and necessitates inclusion of additional product ions for MS/MS of PS RNA.

ETD-Based Proteomic Profiling Improves Arginine Methylation Identification and Reveals Novel PRMT5 Substrates.

Protein arginine methylations are important post-translational modifications (PTMs) in eukaryotes, regulating many biological processes. However, traditional collision-based mass spectrometry methods inevitably cause neutral losses of methylarginines, preventing the deep mining of biologically important sites. Herein we developed an optimized mass spectrometry workflow based on electron-transfer dissociation (ETD) with supplemental activation for proteomic profiling of arginine methylation in human cells. Using symmetric dimethylarginine (sDMA) as an example, we show that the ETD-based optimized workflow significantly improved the identification and site localization of sDMA. Quantitative proteomics identified 138 novel sDMA sites as potential PRMT5 substrates in HeLa cells. Further biochemical studies on SERBP1, a newly identified PRMT5 substrate, confirmed the coexistence of sDMA and asymmetric dimethylarginine in the central RGG/RG motif, and loss of either methylation caused increased the recruitment of SERBP1 to stress granules under oxidative stress. Overall, our optimized workflow not only enabled the identification and localization of extensive, nonoverlapping sDMA sites in human cells but also revealed novel PRMT5 substrates whose sDMA may play potentially important biological functions.

Mn-Cu bimetallic electro-spun catalytic membrane coupled Fenton-like scheme for sulfamethoxazole destruction under ambient pH

Heterogeneous catalyst reuse and the effectiveness of hydrogen peroxide (H2O2)-based advanced oxidation processes under near-neutral conditions remain an obstacle in wastewater remediation. Herein, we put forward a versatile catalytic membrane with Cu-doped MnO active layer anchoring on the polydopamine-modified electrospinning polyvinylidene fluoride (PDA@PVDF) base. The Cu-MnO@PDA@PVDF membrane was conferred admirable sulfamethoxazole (SMX) reduction (over 90% within 90 min) and clogging alleviation (relative flux recovery to 0.98) capabilities via in situ H2O2 activation at pH 8, which was slightly affected by actual water background. Electron paramagnetic resonance (EPR) and trapping tests unveiled the joint contribution of •OH, O2•− and 1O2, with •OH exerting the supreme role in SMX oxidation. The inherent characteristics of dual Mn-Cu centers on the membrane surface for facilitation of electron transfer, H2O2 adsorption and barrierless dissociation to •OH were further elucidated by electrochemical measurements and density functional theory (DFT) computation. Comprehensively, this study proposes a facile procedure and insights into engineering catalytic membrane coupled H2O2 strategy for refractory organic treatment at ambient conditions.

Direct Comparison of the Hinge-Cleaving Proteases IgdE and BdpK for LC-MS-Based IgG1 Clonal Profiling.

Human antibodies are heterogeneous molecules primarily due to clonal sequence variations. Analytical techniques to assess antibody levels quantitatively, such as ELISA, lack the power to resolve abundances at the clonal level. Recently, we introduced an LC-MS-based approach that can distinguish and quantify antibody clones using the mass and retention time of their corresponding Fab-fragments. We used specific hinge-cleaving protease IgdE (FabALACTICA) to release the Fab-fragments from the constant Fc region of the antibody. Here, we explore an alternative IgG1 hinge-cleaving protease, BdpK (FabDELLO), and compare it directly to IgdE for use in IgG1 repertoire profiling. We used IgdE and BdpK in parallel to digest all IgG1s from the same set of plasma samples. Both proteases cleave IgG1 specifically in the hinge, albeit via different mechanisms and at two distinct cleavage sites. Notwithstanding these differences, the Fab fragments generated by IgdE or BdpK produced highly similar clonal repertoires. However, IgdE required ∼16 h of incubation to digest plasma IgG1s, while BdpK required ∼2 h. We authenticated the similarity of the clones by top-down proteomics using electron transfer dissociation. We conclude that BdpK performs very well in digesting polyclonal plasma IgG1s and that neither BdpK nor IgdE displays detectable biases in cleaving IgG1s. We anticipate that BdpK may emerge as the preferred protease for IgG1 hinge-digestion because it offers a shorter digestion time compared to IgdE, an equally specific digestion site, and no bias against any IgG1 present in plasma.

Deciphering the Roles of the Key Oligomerization Domains in Amyloid‐β to Design Amyloid Aggregation Inhibitors

AbstractBackgroundProtein folding issues are significant difficulties since they are linked to various diseases, including dementia. Fibrillar amyloid aggregates composed of misfolded proteins are pathological features of several neurodegenerative diseases. Numerous attempts have been made to treat neurodegenerative diseases by focusing on amyloid aggregates of pathologically disordered proteins. The first Alzheimer’s disease (AD) curative drug was introduced as a consequence of attempts to combat the most frequent kind of dementia. Even though antibody strategies reduce clinical deterioration in mild cognitive disease, alternate techniques must be developed over a single approach (i.e., antibody treatment). Recent studies have attempted to rationally design candidate drugs to improve existing therapeutic approaches or suppress the fibrillar amyloid aggregation process altogether. Prompted by previous findings, we rationally designed amyloid‐β (1‐42) point mutants to inhibit amyloid aggregation.MethodWe investigated the structural ensembles of the monomers using small‐angle X‐ray scattering. In addition, we performed hydrogen‐deuterium exchange mass spectrometry (MS) and ion mobility MS to elucidate the molecular principles governing Aβ42‐inhibitor interactions. We also used microsecond‐scale molecular dynamics simulations to investigate the structures and interactions, and combined them with electron transfer dissociation MS analysis to tackle challenges in identifying the multiple binding sites of intrinsically disordered protein complexes.ResultSpecifically designed mutations disrupt not only amyloid aggregation but reduce its cytotoxicity. Furthermore, we proposed minimal mutation sites to control amyloid‐β (1‐42) self‐assembly behavior. We are now determining the key domains of amyloid‐β (1‐42) that facilitate its self‐assembly to design aggregation inhibitors as potential therapeutic agents. We identified three critical hydrophobic domains (17LVF19, 32IGL34, and 41IA42) on amyloid‐β (1‐42) and investigated their role in the protein’s self‐assembly process. Our results suggest that interchain interactions in the central hydrophobic region (17LVF19) of amyloid‐β (1‐42) are essential for fibrillar aggregation and that their interaction with other domains is related to the accessibility of the central hydrophobic region for initiating the pathological cascade. Our findings shed light on the mechanisms underlying amyloid‐β (1‐42) self‐assembly and reveal key structural domains that aid in this process.ConclusionOur findings can be used to improve the rational design of amyloid‐β (1‐42) aggregation inhibitors in the future.

Diagnostic utility of N-terminal TMPP labels for unambiguous identification of clipped sites in therapeutic proteins

Protein therapeutics are susceptible to clipping via enzymatic and nonenzymatic mechanisms that create neo-N-termini. Typically, neo-N-termini are identified by chemical derivatization of the N-terminal amine with (N-Succinimidyloxycarbonylmethyl)tris(2,4,6-trimethoxyphenyl)phosphonium bromide (TMPP) followed by proteolysis and mass spectrometric analysis. Detection of the TMPP-labeled peptide is achieved by mapping the peptide sequence to the product ion spectrum derived from collisional activation. The site-specific localization of the TMPP tag enables unambiguous determination of the true N-terminus or neo-N-termini. In addition to backbone product ions, TMPP reporter ions at m/z 573, formed via collision-induced dissociation, can be diagnostic for the presence of a processed N-termini. However, reporter ions generated by collision-induced dissociation may be uninformative because of their low abundance. We demonstrate a novel high-throughput LC–MS method for the facile generation of the TMPP reporter ion at m/z 533 and, in some instances m/z 590, upon electron transfer dissociation. We further demonstrate the diagnostic utility of TMPP labeled peptides derived from a total cell lysate shows high degree of specificity towards selective N-terminal labeling over labeling of lysine and tyrosine and highly-diagnostic Receiver Operating Characteristic’s (ROC) of TMPP reporter ions of m/z 533 and m/z 590. The abundant generation of these reporters enables subsequent MS/MS by intensity and m/z-dependent triggering of complementary ion activation modes such as collision-induced dissociation, high-energy collision dissociation, or ultraviolet photo dissociation for subsequent peptide sequencing.

Evidence of H/D Exchange within Metal-Adducted Carbohydrates after Ion/Ion-Dissociation Reactions.

Tandem mass spectrometry (MS/MS) using fragmentation has become one of the most effective methods for gaining sequence and structural information on biomolecules. Ion/ion reactions are competitive reactions, where either proton transfer (PT) or electron transfer (ET) can occur from interactions between multiply charged cations and singly charged anions. Utilizing ion/ion reactions with fluoranthene has offered a unique method of fragment formation for the structural elucidation of biomolecules. Fluoranthene is considered an ideal anion reagent because it selectively causes electron-transfer dissociation (ETD) and minimizes PT when interacting with peptides. However, limited investigations have sought to understand how fluoranthene─the primary, commercially available anion reagent─interacts with other biomolecules. Here, we apply deuterium labeling to investigate ion/ion reaction mechanisms between fluoranthene and divalent, metal-adducted carbohydrates (Ca2+, Mg2+, Co2+, and Ni2+). Deuterium labeling of carbohydrates allowed us to observe evidence of hydrogen/deuterium exchange (HDX) occurring after ion/ion dissociation reactions. The extent of deuterium loss is dependent on several factors, including the physical properties of the metal ion and the fragment structure. Based on the deuterium labeling data, we have proposed ETD, PTD, and intermolecular PT─also described as HDX─mechanisms. This research provides a fundamental perspective of ion/ion and ion/molecule reaction mechanisms and illustrates properties that impact ion/ion and ion/molecule reactions for carbohydrates. Together, this could improve the capability to distinguish complex and heterogeneous biomolecules, such as carbohydrates.

Tandem Mass Spectrometry de novo Sequencing of the Skin Defense Peptides of the Central Slovenian Agile Frog Rana dalmatina.

Peptides released on frogs' skin in a stress situation represent their only weapon against micro-organisms and predators. Every species and even population of frog possesses its own peptidome being appropriate for their habitat. Skin peptides are considered potential pharmaceuticals, while the whole peptidome may be treated as a taxonomic characteristic of each particular population. Continuing the studies on frog peptides, here we report the peptidome composition of the Central Slovenian agile frog Rana dalmatina population. The detection and top-down de novo sequencing of the corresponding peptides was conducted exclusively by tandem mass spectrometry without using any chemical derivatization procedures. Collision-induced dissociation (CID), higher energy collision-induced dissociation (HCD), electron transfer dissociation (ETD) and combined MS3 method EThcD with stepwise increase of HCD energy were used for that purpose. MS/MS revealed the whole sequence of the detected peptides including differentiation between isomeric Leu/Ile, and the sequence portion hidden in the disulfide cycle. The array of the discovered peptide families (brevinins 1 and 2, melittin-related peptides (MRPs), temporins and bradykinin-related peptides (BRPs)) is quite similar to that of R. temporaria. Since the genome of this frog remains unknown, the obtained results were compared with the recently published transcriptome of R. dalmatina.

Statistical Framework for Identifying Differences in Similar Mass Spectra: Expanding Possibilities for Isomer Identification.

Isomeric molecules are important analytes in many biological and chemical arenas, yet their similarity poses challenges for many analytical methods, including mass spectrometry (MS). Tandem-MS provides significantly more information about isomers than intact mass analysis, but highly similar fragmentation patterns are common and include cases where no unique m/z peaks are generated between isomeric pairs. However, even in such situations, differences in peak intensity can exist and potentially contain additional information. Herein, we present a framework for comparing mass spectra that differ only in terms of peak intensity and include calculation of a statistical probability that the spectra derive from different analytes. This framework allows for confident identification of peptide isomers by collision-induced dissociation, higher-energy collisional dissociation, electron-transfer dissociation, and radical-directed dissociation. The method successfully identified many types of isomers including various d/l amino acid substitutions, Leu/Ile, and Asp/IsoAsp. The method can accommodate a wide range of changes in instrumental settings including source voltages, isolation widths, and resolution without influencing the analysis. It is shown that quantification of the composition of isomeric mixtures can be enabled with calibration curves, which were found to be highly linear and reproducible. The analysis can be implemented with data collected by either direct infusion or liquid-chromatography MS. Although this framework is presented in the context of isomer characterization, it should also prove useful in many other contexts where similar mass spectra are generated.

Study of the gas-phase decomposition pathways of poly(ethylene glycol) by Electron Transfer Dissociation

Tandem mass spectrometry involving electron transfer dissociation (ETD) could be very useful for polymer characterization. However, parameters influencing gas-phase decomposition pathways are poorly understood and this method is rarely applied. In this report, precursor ions [polyether + cation(s)]2+ generated from three poly(ethylene glycol) (PEG), which differ only in their chain ends (dimethoxy PEG, monomethoxy/monohydroxy PEG or dihydroxy PEG), were submitted to ETD conditions to study the influence of the cationizing agent, and that of the chain ends on the dissociation pathways. Experiments were carried out using various cationization agents: H+, alkali metals (Li+, Na+ and Cs+), an alkaline earth (Ba2+) and transition metals (Mn2+, Fe2+, Co2+, Ni2+, Cu2+ and Zn2+). The gas phase interaction of a fluoranthene anion with precursor ions [PEG24Me2+cation(II)]2+ or [PEG24Me2+2 cation(I)]2+ gives very variable results depending on the metal. Bond dissociation is not always observed, because competitive reactions can lead to the formation of sufficiently stable species (by addition of fluoranthene, simple reduction of the complex, elimination of the metal, or by addition of O2), to the detriment of fragmentation reactions (in particular with the monovalent cations Na+ and Cs+). In contrast, from [PEG24Me2+cation(II)]2+ all divalent cations lead to bond cleavages. These cations can be classified according to their ability to cause the highest fragmentation: Fe2+ > Ba2+ > Mn2+ ≈ Ni2+ > Co2+ > Cu2+ > Zn2+. Although the Fe2+ adduct presents the highest fragmentation rate, the spectrum is dominated by the loss of a small molecule (ethylene), the Ni2+ cation gives the richest fragmentation (the number of fragment series was the most important). Within the same family of cationization agents (alkaline or transition metals), the processes implemented under ETD conditions can sometimes be very different. Some fragment ions are common to a set of metals (e.g. the an ion series is generated from all adducts), while others are more specific (e.g. the loss of ethylene from Mn2+, Fe2+ and Co2+ adducts). The C–O bond is the most frequently broken bond. From monomethoxy/monohydroxy PEG and dihydroxy PEG, the presence of a hydroxyl function at one end of the chain can compromise bond dissociation along the carbon skeleton if H+ loss is favored, but the use of a transition metal such as Mn and Fe, induces nevertheless fragmentation. This work establishes that ETD of polyether backbone is possible if a suitable cation is chosen (Fe (II), Mn (II) for example), regardless of the chain end (-OCH3 or –OH).

LC-MS/MS-PRM Quantification of IgG Glycoforms Using Stable Isotope Labeled IgG1 Fc Glycopeptide Standard.

Targeted quantification of proteins is a standard methodology with broad utility, but targeted quantification of glycoproteins has not reached its full potential. The lack of optimized workflows and isotopically labeled standards limits the acceptance of glycoproteomics quantification. In this work, we introduce an efficient and streamlined chemoenzymatic synthesis of a library of isotopically labeled glycopeptides of IgG1 which we use for quantification in an energy optimized LC-MS/MS-PRM workflow. Incorporation of the stable isotope labeled N-acetylglucosamine enables an efficient monitoring of all major fragment ions of the glycopeptides generated under the soft higher-energy C-trap dissociation (HCD) conditions, which reduces the coefficients of variability (CVs) of the quantification to 0.7-2.8%. Our results document, for the first time, that the workflow using a combination of stable isotope labeled standards with intrascan normalization enables quantification of the glycopeptides by an electron transfer dissociation (ETD) workflow, as well as the HCD workflow, with the highest sensitivity compared to traditional workflows. This was exemplified by a rapid quantification (13 min) of IgG1 Fc glycoforms from COVID-19 patients.

De novo glycan sequencing by electronic excitation dissociation MS2-guided MS3 analysis on an Omnitrap-Orbitrap hybrid instrument.

Comprehensive de novo glycan sequencing remains an elusive goal due to the structural diversity and complexity of glycans. Present strategies employing collision-induced dissociation (CID) and higher energy collisional dissociation (HCD)-based multi-stage tandem mass spectrometry (MSn) or MS/MS combined with sequential exoglycosidase digestions are inherently low-throughput and difficult to automate. Compared to CID and HCD, electron transfer dissociation (ETD) and electron capture dissociation (ECD) each generate more cross-ring cleavages informative about linkage positions, but electronic excitation dissociation (EED) exceeds the information content of all other methods and is also applicable to analysis of singly charged precursors. Although EED can provide extensive glycan structural information in a single stage of MS/MS, its performance has largely been limited to FTICR MS, and thus it has not been widely adopted by the glycoscience research community. Here, the effective performance of EED MS/MS was demonstrated on a hybrid Orbitrap-Omnitrap QE-HF instrument, with high sensitivity, fragmentation efficiency, and analysis speed. In addition, a novel EED MS2-guided MS3 approach was developed for detailed glycan structural analysis. Automated topology reconstruction from MS2 and MS3 spectra could be achieved with a modified GlycoDeNovo software. We showed that the topology and linkage configurations of the Man9GlcNAc2 glycan can be accurately determined from first principles based on one EED MS2 and two CID-EED MS3 analyses, without reliance on biological knowledge, a structure database or a spectral library. The presented approach holds great promise for autonomous, comprehensive and de novo glycan sequencing.

Expanded Proteomic Survey of the Human Parasite Leishmania major Focusing on Changes in Null Mutants of the Golgi GDP-Mannose/Fucose/Arabinopyranose Transporter LPG2 and of the Mitochondrial Fucosyltransferase FUT1.

The trypanosomatid protozoan parasite Leishmania has a significant impact on human health globally. Understanding the pathways associated with virulence within this significant pathogen is critical for identifying novel vaccination and chemotherapy targets. Within this study we leverage an ultradeep proteomic approach to improve our understanding of two virulence-associated genes in Leishmania, encoding the Golgi mannose/arabinopyranose/fucose nucleotide-sugar transporter (LPG2) and the mitochondrial fucosyltransferase (FUT1). Using deep peptide fractionation followed by complementary fragmentation approaches with higher-energy collisional dissociation (HCD) and electron transfer dissociation (ETD) allowed the identification of over 6,500 proteins, nearly doubling the experimentally known Leishmania major proteome. This deep proteomic analysis revealed significant quantitative differences in both Δlpg2- and Δfut1s mutants with FUT1-dependent changes linked to marked alterations within mitochondrion-associated proteins, while LPG2-dependent changes impacted many pathways, including the secretory pathway. While the FUT1 enzyme has been shown to fucosylate peptides in vitro, no evidence for protein fucosylation was identified within our ultradeep analysis, nor did we observe fucosylated glycans within Leishmania glycopeptides isolated using hydrophilic interaction liquid chromatography (HILIC) enrichment. This work provides a critical resource for the community on the observable Leishmania proteome as well as highlighting phenotypic changes associated with LPG2 or FUT1, ablation of which may guide the development of future therapeutics. IMPORTANCE Leishmania is a widespread trypanosomatid protozoan parasite of humans, with ~12 million cases currently, ranging from mild to fatal, and hundreds of millions asymptomatically infected. This work advances knowledge of the experimental proteome by nearly 2-fold, to more than 6,500 proteins and thus provides a great resource to investigators seeking to decode how this parasite is transmitted and causes disease and to identify new targets for therapeutic intervention. The ultradeep proteomics approach identified potential proteins underlying the "persistence-without-pathology" phenotype of mutants with deletion of the Golgi nucleotide transporter LPG2, showing many alterations and several candidates. Studies of a rare mutant with deletion of the mitochondrial fucosyltransferase FUT1 revealed changes underlying its strong mitochondrial dysfunction but did not reveal examples of fucosylation of either peptides or N-glycans. This suggests that this vital protein's elusive target(s) may be more complex than the methods used could detect or that this target may not be a protein but perhaps another glycoconjugate or glycolipid.

Top-Down Detection of Oxidative Protein Footprinting by Collision-Induced Dissociation, Electron-Transfer Dissociation, and Electron-Capture Dissociation.

Fast photochemical oxidation of proteins (FPOP) footprinting is a structural mass spectrometry method that maps proteins by fast and irreversible chemical reactions. The position of oxidative modification reflects solvent accessibility and site reactivity and thus provides information about protein conformation, structural dynamics, and interactions. Bottom-up mass spectrometry is an established standard method to analyze FPOP samples. In the bottom-up approach, all forms of the protein are digested together by a protease of choice, which results in a mixture of peptides from various subpopulations of proteins with varying degrees of photochemical oxidation. Here, we investigate the possibility to analyze a specifically selected population of only singly oxidized proteins. This requires utilization of more specific top-down mass spectrometry approaches. The key element of any top-down experiment is the selection of a suitable method of ion isolation, excitation, and fragmentation. Here, we employ and compare collision-induced dissociation, electron-transfer dissociation, and electron-capture dissociation combined with multi-continuous accumulation of selected ions. A singly oxidized subpopulation of FPOP-labeled ubiquitin was used to optimize the method. The top-down approach in FPOP is limited to smaller proteins, but its usefulness was demonstrated by using it to visualize structural changes induced by co-factor removal from the holo/apo myoglobin system. The top-down data were compared with the literature and with the bottom-up data set obtained on the same samples. The top-down results were found to be in good agreement, which indicates that monitoring a singly oxidized FPOP ion population by the top-down approach is a functional workflow for oxidative protein footprinting.

Investigation of Product Ions Generated by 193 nm Ultraviolet Photodissociation of Peptides and Proteins Containing Disulfide Bonds.

Disulfide bridges are unique post-translational modifications (PTM) that contribute to protein architecture and modulate function. This PTM, however, challenges top-down mass spectrometry by cyclizing stretches of the protein sequence. In order to produce and release detectable product ions that contribute to the assignment of proteoforms, regions of a protein encapsulated by disulfide bonds require two fragmentation events: cleavage of the protein backbone and cleavage of the disulfide bond. Traditional collisional activation methods do not cleave disulfide bonds efficiently, often leading to low sequence coverage of proteins that incorporate this feature. To address this challenge, we have evaluated the fragmentation pathways enabled by 193 nm ultraviolet photodissociation (UVPD) and UVPD coupled to electron transfer dissociation for the characterization of protein structures incorporating disulfide bonds. Cleavage of disulfide bonds by either approach results in S-S and C-S dissociation products that result from a combination of homolytic cleavage and hydrogen-transfer processes. Characterization of these product ions elevates interpretation of complex top-down spectra of proteins that incorporate disulfide bonds.

The Key Role of Metal Adducts in the Differentiation of Phosphopeptide from Sulfopeptide Sequences by High-Resolution Mass Spectrometry.

Site localization of protein sulfation by high-throughput proteomics remains challenging despite the technological improvements. In this study, sequence analysis and site localization of sulfation in tryptic peptides were determined under a conventional nano-liquid chromatography-mass spectrometry configuration. Tryptic sulfopeptide standards were used to study different fragmentation strategies, including collision-induced dissociation (CID), higher-energy collisional dissociation (HCD), electron-transfer dissociation (ETD), electron-transfer/higher-energy collision dissociation (EThcD), and electron-transfer/collision-induced dissociation (ETciD), in the positive ionization mode. Sulfopeptides displayed only neutral loss of SO3 under CID, while the sequence could be determined for all other tested fragmentation techniques. Results were compared to the same sequences with phosphotyrosine, indicating important differences, as the sequence and modification localization could be studied by all fragmentation strategies. However, the use of metal adducts, especially potassium, provided valuable information for sulfopeptide localization in ETD and ETD-hybrid strategies by stabilizing the modification and increasing the charge state of sulfopeptides. In these conditions, both the sequence and localization could be obtained. In-source neutral loss of SO3 under EThcD provided diagnostic peaks suitable to distinguish the sulfopeptides from the nearly isobaric phosphopeptides. Further confirmation on the modification type was found in the negative ionization mode, where phosphopeptides always had the typical phosphate product ion corresponding to PO3–.

Vital Role of Synthesis Temperature in Co–Cu Layered Hydroxides and Their Fenton-like Activity for RhB Degradation

Cu and Co have shown superior catalytic performance to other transitional elements, and layered double hydroxides (LDHs) have presented advantages over other heterogeneous Fenton catalysts. However, there have been few studies about Co–Cu LDHs as catalysts for organic degradation via the Fenton reaction. Here, we prepared a series of Co–Cu LDH catalysts by a co-precipitation method under different synthesis temperatures and set Rhodamine B (RhB) as the target compound. The structure-performance relationship and the influence of reaction parameters were explored. A study of the Fenton-like reaction was conducted over Co–Cu layered hydroxide catalysts, and the variation of synthesis temperature greatly influenced their Fenton-like catalytic performance. The Co–Cut=65°C catalyst with the strongest LDH structure showed the highest RhB removal efficiency (99.3% within 30 min). The change of synthesis temperature induced bulk-phase transformation, structural distortion, and metal–oxygen (M–O) modification. An appropriate temperature improved LDH formation with defect sites and lengthened M–O bonds. Co–Cu LDH catalysts with a higher concentration of defect sites promoted surface hydroxide formation for H2O2 adsorption. These oxygen vacancies (Ovs) promoted electron transfer and H2O2 dissociation. Thus, the Co–Cu LDH catalyst is an attractive alternative organic pollutants treatment.

Understanding unfolding and refolding of the antibody fragments (Fab). II. Mapping intra and inter-chain disulfide bonds using mass spectrometry

Disulfide bond formation in recombinant protein therapeutics has a significant impact on the integrity and biological activity of the drug product. Formation of the disulfide linkage is the key rate-limiting step in in vitro refolding and overall manufacturing of the antibody fragments (Fab). This investigation is focused on mapping the intra, and inter-chain disulfide bonds in the in vitro refolded antibody fragments by using mass spectrometry (MS). Biosimilar rHu Ranibizumab and rHu Certolizumab expressed using E. coli were selected for the study. Both Fabs contain ten cysteine residues leading to two intra-chain disulfide bonds on each subunit and a single inter-chain disulfide linkage. rHu Certolizumab has an additional cysteine which is unpaired and used for pegylation. The amino acid sequence in the disulfide-bonded peptides was confirmed by Collision-induced dissociation (CID), Electron transfer dissociation (ETD) and High-energy collision dissociation (HCD). The light chain (LC) intra-chain disulfide is formed between Cys23-Cys88 and Cys134-Cys194 in both the Fabs. The heavy chain (HC) intra-chain disulfides are formed between Cys22-Cys96 and Cys150-Cys206 in rHu Ranibizumab. LC and HC subunits of rHu Ranibizumab are covalently linked by disulfide linkage formed between Cys214 of LC and Cys226 of HC. This study suggests that information from multiple MS platforms and orthogonal methods for peptide fragmentation can be effectively used to map disulfide linkages in biosimilar therapeutic proteins.